Deep Vercor

Profile Demensions

Attachment Patterns to Supports
Section Properties
 Deck
Gage
Weight Id for Deflection
Moment
Galv
G90
 Single
Span
Multiple
Spans
+Seff 
 -Seff
(psf) (in4/ft) (in4/ft) (in3/ft) (in3/ft)
26 1.1 0.075 0.075 0.099 0.103
24 1.4 0.097 0.097 0.137 0.138
22 1.7 0.120 0.120 0.172 0.171
20 2.1 0.143 0.143 0.204 0.204
NOTE: Section properties based on Fy = 60 ksi (specified minimum Fy= 80 ksi).
Allowable Reactions
Deck
Gage
End Bearing Interior Bearing
2″ 3″ 4″ 3″ 4″
26 492 572 639 829 916
24 802 927 1032 1366 1503
22 1184 1361 1510 2029 2225
20 1628 1864 2064 2807 3069
NOTE: Allowable reactions are in pounds per foot of deck width and are based on Fy = 60 ksi (specified minimum Fy = 80 ksi).

Deep VERCOR™ is a 1-5/16 inch deep deck that is manufactured from G90 galvanized steel with a yield strength of 80 ksi and is available in 20-26 gage. Galvanized VERCOR deck can be considered as a permanent form. Uncoated decks should not be considered permanent forms; therefore the weight of the slab on uncoated decks should be deducted from the allowable load of the reinforced slab. Uncoated deck is available only as special order.

Welding VERCOR™ decks lighter than 22 gage requires weld washers in accordance with AWS D1.3.

CAD DRAWINGS

Back To Top